Product features
◎ Monolithic cast iron structure with high rigidity | ◎ Moving worktable structure |
◎ Two gear transmission spindle motor box | ◎ High speed mechanical spindle motor |
Standard configuration | |
Control system : SIEMENS | Electric control cabinet cooling system |
Mechanical spindle motor | Automatic chip conveyor |
Imported ball screw and linear guide rail | Processing area lighting |
X、Y guiding rail protection | Three colors alarm light |
Semi enclosed protection | Pulse handheld controller |
Dust blowing of spindle taper hole | Bits cooling system (water-cooled nozzle) |
Liquid cooling system of five axes head | Hydraulic balance system in Z -axis |
Option Configuration | |
Control system: FANUC of Jap | Automatic Tool detection system |
Water outlet from spindle center (internal cooling) | Tool detection |
Three axis grating ruler in X,Y,Z axes | Fast programming and simulation software |
Fully enclosed protection of working area | On line measurement system |
Micro lubrication system (MQL) | Customized processing technology service |
Automatic tool changer system : 20/30/40 |
Item | Unit | AG | |
workbench | width | mm | 1600-3000 |
length | mm | 2000-8000 | |
Processing range | X-axis stroke ( front and rear travel of working bench) | mm | 2000-8000 |
Y-axis stroke ( Left and right stroke of sliding plate) | mm | 1700-3600 | |
Z-axis stroke (Up and down travel of ram) | mm | 800/1250/1500 | |
Inner width of gantry | mm | 1700-3600 | |
principal axis | speed | r/min | 4500-6000 |
power | KW | 15-22 | |
Tapered hole | BT50 | ||
Rapid movement | X、Y axis | m/min | 15 |
Z axis | r/min | 12 |
Note: The parameters provided in the list are for reference only. please refer to the real machine if there is any change.
AG Series typical application
Classic application: metal structure product processing