Product features
◎ Integral cast iron high rigidity structure | ◎ Two gear change headstock |
◎ Table transportable structure | ◎ High speed mechanical spindle |
Standard configuration | |
control system :SIEMEN | Processing area lighting |
Single working tabl | Three colors alarm ligh |
Protection of working are | Mobile hand-held pulse generator |
Boring shaft/ Φ 110 | Bits cooling syste |
Liquid cooling system of five axes head | Hydraulic balance system in Z -axis |
Electric control cabinet cooling system | Grating ruler in B axis |
Option Configuration | |
Control system : FANUC of Japan | Water outlet from spindle motor center (internal cooling |
Multi- pallet exchang | Three axis grating ruler in X,Y,Z axes |
Enclosed protection | Automatic tool detection system |
Fixed spindle motor/boring spindle motor Φ130 | Automatic Workpiece inspection |
Automatic tool changer system: 40/60 | Video monitoring system |
project | Unit | AH | |
Workbench | width | mm | 1600-3000 |
Length | mm | 2000-8000 | |
Working area | X-axis stroke ( front and rear travel of workbench ) | mm | 2000-8000 |
Y-axis stroke ( Up and down travel of spindle motor box ) | mm | 1700-3600 | |
Z-axis stroke ( front and rear travel of spindle motor ) | mm | 800/1250/1500 | |
Worktable rotation (B axis) | ° | 360(0.001) | |
Spindle motor | speed | r/min | 4500-6000 |
power | KW | 15-22 | |
Taper hole | BT50 | ||
Rapid movement | The X and Y axes | m/min | 15 |
z-axis | r/min | 12 |
Note: The technical parameters listed in the table are for reference only and are subject to change without prior notice..
Typical application : AH Series
Parts machining of engine casings and engine box for plane