沈阳SMART批发

The X-axis, Y-axis and Z-axis combination system of this machine tool adopts a box-in-box bridge structure. The X and Y-axis motion systems use symmetrical double-screw drive structures, and each of the X-axis and Y-axis motion systems is equipped with two sets of linear guides and four sliders. The two sets of guides are installed on the inner side of the side wall, which increases the stiffness by several times compared to the top of the system installation. The double columns and double beams structure enhances the overall stiffness and operational stability of the equipment, which is beneficial for improving the machine tool's vibration resistance; enhancing the machine tool's dynamic performance; all axes adopt symmetrical structure layout, and have good thermal stability. The Z-axis slide枕 is combined with an integrated spindle. It moves vertically up and down through four guides. The four guides are arranged in a square pattern， and the movement of chips is stable. The processing area can use a lifting device to load and unload workpieces from the front， back and above. The operation height design makes it convenient for the operator to reach the worktable.