Product features
| ◎ Integrated structure | ◎ Mechanical A & C swing five axes head |
| ◎ Mobile worktable structure | ◎ Titanium alloy processing |
| ◎ Rapid moving speed of X and Y axes: 30m/min |
| Standard configuration | |
Control system：SIEMENS | Electric control cabinet cooling system |
| AC double pendulum five shaft head | Automatic chip conveyor |
| Inlet lead screw and linear guide rail | Processing area lighting |
Guiding rail protection in X,Y axes | Three colors alarm light |
Three axis grating ruler in X,Y,Z axes | Pulse handheld controller |
| Semi enclosed protection | Bits cooling system (water-cooled nozzle) |
Dust blowing of spindle taper hol | Hydraulic balance system in Z-axis |
Liquid cooling system of five axes head |
| Option Configuration | |
Control system: HEIDENHAIN, Germany | Special post-processing software |
Water outlet from spindle motor center (internal cooling | Automatic tool detection system |
Fully enclosed protection | Fast programming and simulation software |
| Ultrasonic cutting | Automatic measurement system |
| Micro lubrication system (MQL) | Customized processing technology service |
| Tool magazine 20/30/40 |
| Item | Unit | A80 | A20 | |
| workbench | width | mm | 1600-3000 | 1600-3000 |
| length | mm | 3000-8000 | 3000-8000 | |
| Processing range | X-axis stroke ( front and rear travel of working bench ) | mm | 3200-8200 | 3200-8200 |
Y-axis stroke ( Left and right stroke of sliding plate ) | mm | 2200-3600 | 2200-3600 | |
Z-axis stroke ( Up and down travel of ram ) | mm | 1000/1500 | 1000/1500 | |
Swing angle of A axis | ° | ±110 | ±110 | |
Swing angle of C axis | ° | ±220 | ±320 | |
Spindle motor | speed | r/min | 4000 | 8000-24000 |
| power | KW | 35-41 | 40-70 | |
| torque | Nm | 700-1200Nm | 35-300Nm | |
| hilt | BT50/HSKA100 | HSK A63/A100 | ||
| Rapid movement | X、Y axis | m/min | 15 | 30 |
| Z-axis | m/min | 15 | 20 | |
| A/C axis | r/min | 10 | 60 | |
Note: The parameters provided in the list are for reference only. please refer to the real machine if there is any change.
Typical application : A80/A20 series
Classic application: Processing of small aluminum alloy and titanium alloy structural parts
Customer service 1
Customer service 2